Waterproof LED Driver 12V 450W Light Strip Light Box Buried Light Power Supply

Quick Detail:

• Waterproof type
• AC/DC switching 12V 450W 37.5A single-switch LED driver
• AC input voltage: 170-250V
• 1600V High voltage test, full loading test and old aging test
• Constant voltage driver apply for outdoors LED light strip, light box
• IP67 grade
• CE, ROHS approvals
• 3 Years Warranty
• Size: 260*102*35mm
• Weight: 1900g

Description:

Waterproof power supply is used in the case of dust-proof with waterproof grade IP67, with multiple protections such as short circuit, over current, overload and so on.

Engineerinbg type waterproof led drivers mainly include 12V and 24V series with 20W, 30W, 40W,50W, 60W,80W,100W,120W,150W, 200W,

250W, 300W,400W, 450W, 500W, 550W, 600W.

Mainly used in LED spotlights, LED light strips, LED street lamps, LED light box, LED module light , LED signboard light, LED bulbs, LED buried lights, LED sky lights, LED flat lights, LED wall washing lights and other LED lamps to provide driving capacity. The most important feature is that it is waterproof and can be used outdoors without fear of rain, fog, direct sunlight and other harsh environments.

Specifications:

Notices:

1. Input voltage should be within the specified voltage range (for examples: input voltage 220VAC).

2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.

3. Prohibited to install power supply in the presence of flammable materials (such as wood products, flammable plastic, etc), to stay away from petrol stations or where prohibited Fireworks.

4. Accurate calculation of load power, peak use, suggested user to use power supply based on power 80% load, do not overload.

5. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.

6. For safety, properly grounded, the output power cable must be ≥2.5mm²

7. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).

8. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.

Engineering type IP67 LED drivers 12V/24V related models list:

Applications:

Mainly for LED spotlights, LED light strips, LED street lamps, LED light box, LED module light , LED signboard light, LED bulbs, LED buried lights, LED sky lights, LED flat lights, LED wall washing lights and other LED lamps to provide driving capacity. The most important feature is that it is waterproof and can be used outdoors without fear of rain, fog, direct sunlight and other harsh environments.

Waterproof power supply is used in the case of dust-proof with waterproof grade IP67, with multiple protections such as short circuit, over current, overload and so on.

Main features

1. High reliability.

especially like the drive power of LED street lamps, installed in the air, maintenance is not convenient, maintenance costs are also large

2. High efficiency.

LED is energy saving products, driving power efficiency to be high. It is particularly important for the structure of the power supply installed in the lamps and lanterns. Because the luminous efficiency of leds decreases as the LED temperature increases, the heat dissipation of leds is very important. The efficiency of the power supply is high, its consumption power is small, and the heat emitted in the lamps and lanterns is small, which reduces the temperature rise of the lamps and lanterns. It is beneficial to delay the light decay of LED.

3. High power factor.

The power factor is the load requirement of the grid. General 70 watts below the use of electrical appliances, no mandatory indicators. Although the power factor of a single appliance with small power is low, it has little impact on the power grid, but at night when everyone lights up, the same load is too concentrated, it will produce more serious pollution to the power grid. For 30 watts ~40 watts LED drive power supply, it is said that in the near future, there may be a certain index requirement on the power factor.

4. Two kinds of driving methods.

one is a constant voltage source for multiple constant current sources, each constant current source for each LED power supply. In this way, the combination is flexible, one LED failure, does not affect the work of other LED, but the cost will be slightly higher. The other is direct constant current power supply, LED series or parallel operation. It has the advantage of low cost, but poor flexibility, but also to solve a LED failure, does not affect the operation of other LED problems. These two forms coexist for a period of time. Multichannel constant-current output power supply is better in cost and performance. It may be the mainstream direction.

Shenzhen XingJia xinyuan Electronics Co., Ltd. is a high-tech enterprise specializing in R&D, production and sales of switching power supply from 2009. It chooses the best raw materials, implements the most stringent production and installation process, and continuously develops and launches new products. The products have passed the ISO 9001 certification

Since its inception, we have adhered to the concept of "customer-centered" company, integrity, quality, satisfactory service, the strongest technical support, the best price is my purpose and rely on their own exquisite technology to devote themselves to the research, development and production of switching power supply.

Our company integrates scientific research, production and sales of switching power supply. It has development department, production department and quality inspection department. Each department takes strict responsibility at all levels to make its products occupy a place in the fierce market competition. The company actively carries out and implements the policy of integration of production and marketing, seizes market opportunities, and strives for rapid development and continuous expansion in the fierce market competition, large scale production and independent innovation capability. The product adopts PWM high frequency pulse width modulation technology after mature standardized production, strict 100% on-load aging and high-low voltage impact test, complete test records and other strict process flow. The product is widely used in telecommunications, power, aerospace, industrial control systems, postal communications, medical equipment and other fields, and is a brand deeply trusted by customers.